Most people tend to think that burnishing surfaces is a simple procedure, but that is not the case. Various companies have outlined and detailed procedures so that clients can have an idea of what Florida Commercial Polished Concrete is all about. Usually, a thin coating is observed on surfaces that have not undergone the burnishing process, and it should be removed.
The machine uses rough diamonds that are made of metal. If the aggregate present in the floor has been exposed, the burnish from the first pour has to be removed too. This process is a bit complex than many people think thus it requires technicians that are both qualified and experienced.
Surface grinding is usually the initial step. Before that, there is a test that has to be done to check how hard the surface is. This test is important because it helps the technicians to select the right tools that will be suitable for that particular floor. After the test, the grinding is then done using diamond tooling that is appropriate for that type of floor.
After the grinding is completed, stains and densifier are applied on floors. The removal of the top thin layer makes these floors to be soft and weak; the densifier will help in hardening the surface once more. The stain is applied first, and when it dries, the densifier is applied, and the slab is kept wet for almost 30 minutes. A second coat of the densifier is applied if the first coat is not enough.
When the stain, as well as the densifier, completely dry, honing of the slab is done using diamond pads with a grit of 400. It is usually during this stage that one can start observing a shiny appearance on the surfaces. However, the shininess can sometimes take too long to appear. Thus one should be patient if he/she wants to see good results.
making the slabs smooth follows, and this is done using pads that have a grit of 1500-3000 depending on how smooth the floor is required to be. This highly depends on the requests of the clients as some clients want the surfaces to be as shiny and clear as a mirror. Other clients would request the covers a bit cloudy thus the technicians must be aware of the requests of his clients.
Polishing pads are used to finish the varnishing process giving the slab the required degree of smoothness. This step requires one to be patient so that they can achieve the desired results. Also, the technicians that you hire should have certification to show that they are qualified so that they do not perform sub-standard work on your floor thus one has to ensure a lot of care when hiring them.
It is advisable to follow the steps as they are provided if you want to have results that will impress the client. The procedures are usually different in various companies thus it is advisable to follow what your technician has provided you. This information will help you to understand the whole process.
The machine uses rough diamonds that are made of metal. If the aggregate present in the floor has been exposed, the burnish from the first pour has to be removed too. This process is a bit complex than many people think thus it requires technicians that are both qualified and experienced.
Surface grinding is usually the initial step. Before that, there is a test that has to be done to check how hard the surface is. This test is important because it helps the technicians to select the right tools that will be suitable for that particular floor. After the test, the grinding is then done using diamond tooling that is appropriate for that type of floor.
After the grinding is completed, stains and densifier are applied on floors. The removal of the top thin layer makes these floors to be soft and weak; the densifier will help in hardening the surface once more. The stain is applied first, and when it dries, the densifier is applied, and the slab is kept wet for almost 30 minutes. A second coat of the densifier is applied if the first coat is not enough.
When the stain, as well as the densifier, completely dry, honing of the slab is done using diamond pads with a grit of 400. It is usually during this stage that one can start observing a shiny appearance on the surfaces. However, the shininess can sometimes take too long to appear. Thus one should be patient if he/she wants to see good results.
making the slabs smooth follows, and this is done using pads that have a grit of 1500-3000 depending on how smooth the floor is required to be. This highly depends on the requests of the clients as some clients want the surfaces to be as shiny and clear as a mirror. Other clients would request the covers a bit cloudy thus the technicians must be aware of the requests of his clients.
Polishing pads are used to finish the varnishing process giving the slab the required degree of smoothness. This step requires one to be patient so that they can achieve the desired results. Also, the technicians that you hire should have certification to show that they are qualified so that they do not perform sub-standard work on your floor thus one has to ensure a lot of care when hiring them.
It is advisable to follow the steps as they are provided if you want to have results that will impress the client. The procedures are usually different in various companies thus it is advisable to follow what your technician has provided you. This information will help you to understand the whole process.
About the Author:
You can find details about the benefits you get when you install Florida commercial polished concrete floors at http://www.concretereflections.com right now.