In painting, prior preparation is necessary. Pulp painting also needs a lot of careful preparation. This is especially needed in the making of the pulp. Once the pulp is done properly, one is assured of a good result of the painting.
It is the art of using the colored pulp as a medium and applying it on a surface. The pulp can be derived from different qualities of materials such as reeds, grass, cotton or even bamboo.
It is important to select the fiber that will work for you. Each fiber has a different type of texture. You can get different results on the same painting depending on the fiber you used. The next step is to create the pulp by mixing the fiber with water to provide a fine texture.
The bamboo pulp is generally the best to make pulp as it is readily available. It is also less absorbent and easy to control. Once the fiber is well mixed, they are then pigmented with different colors.
It is the art of using the colored pulp as a medium and applying it on a surface. The pulp can be derived from different qualities of materials such as reeds, grass, cotton or even bamboo.
It is important to select the fiber that will work for you. Each fiber has a different type of texture. You can get different results on the same painting depending on the fiber you used. The next step is to create the pulp by mixing the fiber with water to provide a fine texture.
The bamboo pulp is generally the best to make pulp as it is readily available. It is also less absorbent and easy to control. Once the fiber is well mixed, they are then pigmented with different colors.
Each pulp tends to absorb color differently. The fibers tend to behave just the same way textiles do. One red pigment when used to color different fibers, it will appear differently. This all depends on the texture of the pulp and how well it was mixed.
You need to be very attentive when mixing the colors or else you will end up with a tone you did not expect. Once you are done mixing the colors on the pulps, keep the pulps separate. Do not allow them to mix the colors by keeping them together.
In this art painting, colors can be easily added. The whole idea of the painting is to create illusions with color. When the painting is viewed at close range, it is easy to notice the fibers used and the color separately. But when viewed at a distance, the painting gives a different illusion.
Before you start painting, it is important to have an idea of how you want the painting to be. You can start by drawing a sketch that will guide you. This is particularly helpful since you will be painting from the front moving to the back.
You, therefore, have to practice this special technique. It is unlike other regular painting and will require some practice to get it right moving from the front to the back.
This approach avoids you dealing with painting on wet background pulp. You cannot put layers on top of other wet layers as you will not control the outcome. Hence you start with the foreground and work backward.
The pulp should remain wet during the painting period. You will need to carefully apply the different layers of pulp when trying to achieve depth in the painting. You can also use different color tones to achieve this.
You may use a board on the background of the painting to strengthen it and allow it to hold the painting properly. You can use silicon as it is the best adhesive for this work. It is also recommended to clear out as much water as possible using a vacuum pump to qu
You need to be very attentive when mixing the colors or else you will end up with a tone you did not expect. Once you are done mixing the colors on the pulps, keep the pulps separate. Do not allow them to mix the colors by keeping them together.
In this art painting, colors can be easily added. The whole idea of the painting is to create illusions with color. When the painting is viewed at close range, it is easy to notice the fibers used and the color separately. But when viewed at a distance, the painting gives a different illusion.
Before you start painting, it is important to have an idea of how you want the painting to be. You can start by drawing a sketch that will guide you. This is particularly helpful since you will be painting from the front moving to the back.
You, therefore, have to practice this special technique. It is unlike other regular painting and will require some practice to get it right moving from the front to the back.
This approach avoids you dealing with painting on wet background pulp. You cannot put layers on top of other wet layers as you will not control the outcome. Hence you start with the foreground and work backward.
The pulp should remain wet during the painting period. You will need to carefully apply the different layers of pulp when trying to achieve depth in the painting. You can also use different color tones to achieve this.
You may use a board on the background of the painting to strengthen it and allow it to hold the painting properly. You can use silicon as it is the best adhesive for this work. It is also recommended to clear out as much water as possible using a vacuum pump to qu
Before you start painting, it is important to have an idea of how you want the painting to be. You can start by drawing a sketch that will guide you. This is particularly helpful since you will be painting from the front moving to the back.
You, therefore, have to practice this special technique. It is unlike other regular painting and will require some practice to get it right moving from the front to the back.
This approach avoids you dealing with painting on wet background pulp. You cannot put layers on top of other wet layers as you will not control the outcome. Hence you start with the foreground and work backward.
The pulp should remain wet during the painting period. You will need to carefully apply the different layers of pulp when trying to achieve depth in the painting. You can also use different color tones to achieve this.
You may use a board on the background of the painting to strengthen it and allow it to hold the painting properly. You can use silicon as it is the best adhesive for this work. It is also recommended to clear out as much water as possible using a vacuum pump to quicken the drying process.
The board can later be removed when the painting is completely dry. The drying period can be weeks depending on the size of the painting. You will end up with a paper thin painting once you remove the board.
About the Author:
You, therefore, have to practice this special technique. It is unlike other regular painting and will require some practice to get it right moving from the front to the back.
This approach avoids you dealing with painting on wet background pulp. You cannot put layers on top of other wet layers as you will not control the outcome. Hence you start with the foreground and work backward.
The pulp should remain wet during the painting period. You will need to carefully apply the different layers of pulp when trying to achieve depth in the painting. You can also use different color tones to achieve this.
You may use a board on the background of the painting to strengthen it and allow it to hold the painting properly. You can use silicon as it is the best adhesive for this work. It is also recommended to clear out as much water as possible using a vacuum pump to quicken the drying process.
The board can later be removed when the painting is completely dry. The drying period can be weeks depending on the size of the painting. You will end up with a paper thin painting once you remove the board.
About the Author:
When you are looking for information about pulp painting, come to our web pages today. More details are available at http://www.moffettfinearts.com/blog now.